Stefan, Peter, Thanks for the replies guys.
I have looked at the web page and will work on it over the weekend. My next step will be to find out hoe the CO lines connect, but that's another project. Regards Dave -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Stefan Gofferje Sent: 05 February 2005 12:48 To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [Asterisk-Users] ISDN X-Over Peter Svensson schrieb: > On Sat, 5 Feb 2005, Stefan Gofferje wrote: > > >>As far as I know, you just need a second ISDN card and a X-cable. No >>mods to the NT1 are needed. To build such a cable, just swap the outer >>pair with the inner pair. > > > Termination and power are needed. Most isdn cards provide neither, but > some do. Yes, as I wrote, I was reading to fast... However, termination may be done by simply connecting a terminated multiplug to the card and power is only needed for phones without own power source. I have e.g. a Siemens Gigaset cordless phone connected to my internal port, so I need no power. But anyway, I believed, David was writing about ISDN monitoring, so my answer was inadequate, I confess. May we PLEASE leave out the tar and feathers? Only this time? :-) Regards, Stefan -- (o_ Stefan Gofferje | Linux Systems Specialist //\ Reg'd Linux User #247167 | SuSE Certified Linux Trainer V_/_ Linux is like a Wigwam - No gates, no windows, Apache inside _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users