Hello, With a Junghanns QuadBRI card I am experiencing trouble when dialing a non-local number via ISDN. The site where I have trouble I can dial out using and an active ISDN Fritz (=AVM) BRI card, but junghanns no go.
I have tested the asterisk and hardware in the same set up at a geographical different location where it does work. I am pretty much stuck now. It seems that the progress indicator 1e 02 82 81 is the problem saying the call is not end-to-end ISDN. On the site (A) where things go wrong I see the following ISDN errors: < Message type: ALERTING (1) < [1e 02 82 88] < Progress Indicator (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) 0: 0 Location: Public network serving the local user (2) < Ext: 1 Progress Description: Inband information or appropriate pattern now available. (8) ] < [1e 02 82 81] < Progress Indicator (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) 0: 0 Location: Public network serving the local user (2) < Ext: 1 Progress Description: Call is not end-to-end ISDN; further call progress information may be available inband. (1) ] Sending Receiver Ready (3) Then I get a message I am dialing a non-existing number that does exist. On the site (B) where things go well I see: < Message type: ALERTING (1) < [1e 02 82 88] < Progress Indicator (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) 0: 0 Location: Public network serving the local user (2) < Ext: 1 Progress Description: Inband information or appropriate pattern now available. (8) ] Sending Receiver Ready (3) I am not able to determine what problem I am facing so no clue where to look for a solution any suggestions are welcome. I use bristuff-0.2.0-RC5 from Junghanns(includes zaptel 1.0.4, libpri 1.0.4 and asterisk 1.0.5. I use the standard zapata.conf that goes with it and it is like: [channels] switchtype = euroisdn pridialplan = local prilocaldialplan = local echocancel = yes immediate=no group = 1 context=internal signalling = bri_net_ptmp immediate=no channel => 1-2 ; S/T port 1 in NT mode with power enabled group = 2 context=pstn signalling = bri_cpe_ptmp immmediate=yes ;overlapdial=yes channel => 4-5 ; S/T port 2 in TE mode this is the incoming ISDN BRI (from PSTN) Regards, Max _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
