Yeah, I also noticed that * lacks the ability to forward calls based on the type of call, but I have no idea whether this issue has any priority with the development team. It is probably better to ask this question on Asterisk-Dev mailing list.
Frank Sautter wrote: > hi, > > i have the problem that i'm not able to set and receive the Service > Indication (SIN) from our E1-PRI and from our ericsson BP250. > > The problem is, that the Bearer Capability (BC) together with the High > Level Compatibility (HLC) and Low Level Compatibility (LLC) forms the > Service Indicator (SIN). > The SIN is used to determine if the call is voice, fax or data. It's > essential to set the SIN so the called party is able which device has > to answer a call (e.g. telephone or fax) > > as far as i dug into the source neither the BC nor the HLC or LLC data > is forwarded to a dialplan variable and only the BC is decoded in libpri. > > has anyone a solution for this? > > is there any usable documentation on the HLC or LLC octets (bytes)? > i searched etsi and was overwhelmed with the searchresults (1531). > what i need to modify libpri would be a table of possible values and > where to find the HLC and LLC fields in the D-Channel. > > regards > frank > _______________________________________________ > Asterisk-Users mailing list > Asterisk-Users@lists.digium.com > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > > _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users