> After having spent several time to look for any > solution for my problem, I decided to write here. > > Here is the problem got a Digium X101 FXO card and > Digium TDM400P alias freshmaker (1 fxs module on it on > first port ) in my asterisk box. The X101 works > perfectly. > The problem comes from the TDM400, when i plug a > tested working phone on it , i get no dialtone; the > goal is to connect a few old non-ip phones to the PBX. > > > The modules zaptel and wctdm compiled and are loaded > successfully. Here are some infos : > debian linux > asterisk 1.0.5 > cvs zaptel > > zaptel.conf > fxoks=2 ; the x101 card uses channel 1 with fxsks=1 > loadzone=fr > default zone = fr
Your /etc/zaptel.conf file should have fxoks=1 ; for the tdm card with a fxs module for telephone use fxsks=2 ; for the x100p card connected to a pstn line You might have to reverse the "1" and "2" in the above depending upon whether the x100p card or the tdm card is discovered/listed first. Then do a "ztcfg -vvvv" to see what's registered, etc. > when i do a ztcfg it succesfully says me "registered > zone 2" > But i cant see the phone in the zttool > > /etc/asterisk/zapata.conf > [channels] > language=fr > context=default > signalling=fxo_ks > echocancel=yes > group= 1 > busydetect=yes > channel => 2 > > Asterisk loads succesfully; and a "zap show channels" > tells me : > pseudo cartezap fr > 2 cartezap fr > > But the problem is : i still dont have any dialtone on > the phone. Anyone has an idea ? _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
