Hello,
I'm using Asterisk (latest CVS head) to perform outbound call as robot/testing tool for an IVR platform, with a Wildcard T100P configure as ISDN Pri.
For develop the exten context script I was using a real PSTN ISDN Megalink (DMS100) to reach the platform and my script was able to correctly detected the DTMF tone send back by the platform to synchronize the script.
But for load test, I want to used a direct ISDN link with the platform, without to change anything at the Asterix side, I configure the platform to be the ISDN Network side (DMS100) with a twist cable. The D-Channel can up; I am able to perform call, except Asterisk doesn't detect any DTMF anymore? Why? What is the relation with the ISDN link?
I use the "monitor" command to record the call, and I really hear the DTMF tone correctly...
I try to put relaxdtmf=yes in the Zapata.conf, but no success....
Thanks for any help or suggestion to diagnose this problem.
Sylvain Gagnon, B.Ing., M.Sc.A.
Speech Technology Integrator
Intégrateur en technologie de la voix
BCE Elix
Specialist in contact center solutions
Spécialiste en solutions pour centres de contacts
14 Commerce Place, 5th Floor
Nuns' Island (Québec) CANADA H3E 1T5
t: 514-768-1000, ext. 2224
f: 514-768-7680
www.bceelix.com
_______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
