Hello
Group
I have a
Asterisk server running with 2 Digium T1 cards installed. 1 card connects to
Telco via a PRI. The 2nd card is connected to a fax server via Digi DataFire RAS
24 PT1 Adapter (Digi0001). The idea is to have Asterisk route the calls based on
DID or FAX tones. Everything is working great so far. The only problem is the
Fax server does not see the DID. How can I tell if Asterisk it passing the DID
and CallerID info to the server? I seen this was done with
HylaFax.
Any help would be
great!!
Here is my configs
cat
zaptel.conf
#PRI to Telco
#PRI to Telco
span=1,1,0,esf,b8zs
bchan=1-23
dchan=24
bchan=1-23
dchan=24
# PRI to Fax
server
span=2,0,0,esf,b8zs
bchan=25-47
dchan=48
span=2,0,0,esf,b8zs
bchan=25-47
dchan=48
zapata.conf
[channels]
context=from-analog
signalling=pri_cpe
switchtype=dms100
group=1
usecallerid=yes
hidecallerid=no
restrictcid=no
usecallingpres=no
useincomingcalleridonzaptransfer=yes
callerid=asreceived
faxdetect=no
musiconhold=default
channel => 1-23
[channels]
context=from-analog
signalling=pri_cpe
switchtype=dms100
group=1
usecallerid=yes
hidecallerid=no
restrictcid=no
usecallingpres=no
useincomingcalleridonzaptransfer=yes
callerid=asreceived
faxdetect=no
musiconhold=default
channel => 1-23
context=from-sip-internal
switchtype=dms100
signalling=pri_net
group=2
overlapdial=yes
usecallerid=yes
hidecallerid=no
restrictcid=no
usecallingpres=no
useincomingcalleridonzaptransfer=yes
callerid=asreceived
faxdetect=no
musiconhold=default
switchtype=dms100
signalling=pri_net
group=2
overlapdial=yes
usecallerid=yes
hidecallerid=no
restrictcid=no
usecallingpres=no
useincomingcalleridonzaptransfer=yes
callerid=asreceived
faxdetect=no
musiconhold=default
channel =>
25-47
_______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
