On Sat, 2005-02-12 at 12:20 +0000, JunkMail wrote: > For the single card I was using with "isdntool" for initialization, > wich > works fine but has no support for two cards. > > Can anyone tell me exactly how to initialize the ISDN system manually > ??? > > It all starts with "modprobe -v hisax type=21,21" (loading hisax and > telling > it that we'll use two teles pci cards) > and then ? what else ???
Not sure if this will help you - I ponce played with a mixture of single port cards... Can't remember where I got the 'id=' bits from.. # For one eicon PCI #modprobe hisax type=11 # For two eicon cards modprobe hisax type=11,11 id=201%202 # For Asuscom ISA # isapnp /etc/isapnp.conf #modprobe hisax type=12 irq=3 io=0x0100 -- . . ___. .__ Posix Systems - Sth Africa. e.164 VOIP ready /| /| / /__ [EMAIL PROTECTED] - Mark J Elkins, Cisco CCIE / |/ |ARK \_/ /__ LKINS Tel: +27 12 807 0590 Cell: +27 82 601 0496 _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users