Hi Guills, I followed the instructions exactly as described on the voip pages as well as your instructions below.
I still get the same errors. pbx01 zaptel # modprobe zaptel FATAL: Error inserting zaptel (/lib/modules/2.6.10-gentoo-r6/misc/zaptel.ko): Unknown symbol in module, or unknown parameter (see dmesg) DMESG: zaptel: Unknown symbol crc_ccitt_table And of course ztdummy fails to load becuase the zaptel does not load. Thanks On Mon, 14 Feb 2005 13:55:04 -0800 "Chamberland-Larose, Guillaume" <[EMAIL PROTECTED]> wrote: > The ztdummy requires zaptel to be loaded. You don't need any zaptel > devices just the kernel module. Get zaptel then follow the instructions > on the wiki @ http://www.voip-info.org/wiki-Asterisk+timer+ztdummy > i.e.: > > ztdummy and Kernel 2.6 > Recent CVS versions (as of July 2004) also have zaptel modules which > work with 2.6 kernels (type "make linux26" to compile them). The 2.6 > version of the ztdummy module is completely different to the 2.4 > version. Firstly it does not rely on the USB hardware being there; > instead it uses the PC hardware's clock (which under 2.6 kernels can be > set to generate interrupts at the required precision), so it can be used > on any machine, rather than only those with the right USB hardware. > Effectively the 2.6 version of ztdummy does the same job as zaprtc does > for 2.4 kernels. I have been using ztdummy for 2.6 for a while now, and > have had no problems with it. > > To install, simply checkout zaptel from the Asterisk CVS and do the > following: > > - cd /usr/src/zaptel > > * READ /usr/src/zaptel/README.udev and follow the steps > * check modules on: /etc/sysconfig/zaptel> if you have no digium > hardware comment out all modeules except ztdummy. > > - make linux26 > - modprobe zaptel > - modprobe ztdummy > > Cheers, > Guills > > > > -----Original Message----- > > From: Richard J. Sears [mailto:[EMAIL PROTECTED] > > Sent: Monday, February 14, 2005 1:16 PM > > To: asterisk-users@lists.digium.com > > Subject: [Asterisk-Users] ztdummy on Gentoo 2.6.10 Box > > > > Hi Everyone, > > > > I read through the list on the issues with the ztdummy driver > > which I need for MeetMe, but I seem to have come across a > > problem that I cannot seem to find an answer for. > > > > I am running Gentoo 2.6.10 on an Intel box. > > > > I have read the the wiki entries on the ztdummy and followed > > the instructions as they relate to the 2.6 kernel. > > > > Everything compiled great, but a modprobe ztdummy returned this: > > > > WARNING: Error inserting zaptel > > (/lib/modules/2.6.10-gentoo-r6/misc/zaptel.ko): Unknown > > symbol in module, or unknown parameter (see dmesg) > > WARNING: Error inserting zaptel > > (/lib/modules/2.6.10-gentoo-r6/misc/zaptel.ko): Unknown > > symbol in module, or unknown parameter (see dmesg) > > FATAL: Error inserting ztdummy > > (/lib/modules/2.6.10-gentoo-r6/misc/ztdummy.ko): Unknown > > symbol in module, or unknown parameter (see dmesg) > > FATAL: Error running install command for ztdummy > > > > > > Here is what my dmesg says: > > > > zaptel: Unknown symbol crc_ccitt_table > > zaptel: Unknown symbol crc_ccitt_table > > ztdummy: Unknown symbol zt_receive > > ztdummy: Unknown symbol zt_transmit > > ztdummy: Unknown symbol zt_unregister > > ztdummy: Unknown symbol zt_register > > > > > > > > I DO NOT have any Zaptel devices in my system and I VIed the > > makefile and uncommented the ztdummy as instructed. > > > > > > I guess my question is - what the heck is happeneing. Why is > > ztdummy trying to load zaptel which I do not have in my system..? > > > > > > Any help would be greatly appreciated. > > > > > > Thanks > > > > > > > > ****************************************** > > Richard J. Sears > > Vice President > > American Internet Services > > ---------------------------------------------------- > > [EMAIL PROTECTED] > > http://www.adnc.com > > ---------------------------------------------------- > > 858.576.4272 - Phone > > 858.427.2401 - Fax > > INOC-DBA - 6130 > > ---------------------------------------------------- > > > > I fly because it releases my mind > > from the tyranny of petty things . . > > > > > > "Work like you don't need the money, love like you've > > never been hurt and dance like you do when nobody's > > watching." > > > > _______________________________________________ > > Asterisk-Users mailing list > > Asterisk-Users@lists.digium.com > > http://lists.digium.com/mailman/listinfo/asterisk-users > > To UNSUBSCRIBE or update options visit: > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > _______________________________________________ > Asterisk-Users mailing list > Asterisk-Users@lists.digium.com > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users ****************************************** Richard J. Sears Vice President American Internet Services ---------------------------------------------------- [EMAIL PROTECTED] http://www.adnc.com ---------------------------------------------------- 858.576.4272 - Phone 858.427.2401 - Fax INOC-DBA - 6130 ---------------------------------------------------- I fly because it releases my mind from the tyranny of petty things . . "Work like you don't need the money, love like you've never been hurt and dance like you do when nobody's watching." _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users