Are there any settings that I need to change on the phone to match this? Thank you!
-------------------------------------------------- Jason A. Crome Senior Software Engineer, DEVNET, Inc. E-Mail: [EMAIL PROTECTED] http://www.devnetinc.com > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of > Hecken, Guido > Sent: Wednesday, February 16, 2005 11:02 AM > To: Asterisk Users Mailing List - Non-Commercial Discussion > Subject: RE: [Asterisk-Users] Can't connect Snom 190 to > Asterix PBX. Suggestions? > > Here is a part of a working sip.conf for Asterisk with SNOM190 Phones. > Try using host=dynamic and have a closer look at the > configuration in the snom 190. > Also, try using dtmfmode=rfc2833 . > > [general] > realm = hallinux2.gwsnettech.local > port = 5060 > bindaddr = 0.0.0.0 > context = default > disallow=all > allow=alaw > allow=ulaw > allow=gsm > register => 081503:[EMAIL PROTECTED]/081503 language=de > tos=0x04 > > [6301] > type=friend > username=6301 > secret=xxxxxx > host=dynamic > disallow=all > allow=alaw > allow=ulaw > allow=gsm > dtmfmode=rfc2833 > mailbox=6301 > context=teilnehmer > callgroup=1 > pickupgroup=1 > group=2 > callerid => "Guido Hecken [gwsNetTech]" <6301> > > Hope, this helps... > > Guido Hecken > > > -----Urspr�ngliche Nachricht----- > > Von: Jason A. Crome [mailto:[EMAIL PROTECTED] > > Gesendet: Mittwoch, 16. Februar 2005 17:05 > > An: [email protected] > > Betreff: [Asterisk-Users] Can't connect Snom 190 to Asterix PBX. > Suggestions? > > > > Hello, > > > > I'm attempting to get Asterisk running for the first time > in my company. > As > > I've never used it before, I am creating a small testbed > with which to > learn > > Asterisk and get the kinks worked out before attempting to > roll it out. > > > > I have * compiled and running, and built the sample config files as > > suggested by the Wiki. I got my Snom 190 configured to use > DHCP, and > > have created an entry in my sip.conf for the phone. > However, when * > > boots, I > get > > the following message: > > > > -- Got SIP response 404 "Not Found" back from 192.168.2.60 > > > > When I look at the SIP trace logs in the phone, I see the following: > > > > Received from udp:192.168.2.15:5060 at 16/2/2005 > 09:38:54:330 (463 bytes): > > > > NOTIFY sip:[EMAIL PROTECTED] SIP/2.0 > > Via: SIP/2.0/UDP 192.168.2.15:5060;branch=z9hG4bK5e3acadf > > From: "asterisk" <sip:[EMAIL PROTECTED]>;tag=as65dd26cd > > To: <sip:[EMAIL PROTECTED]> > > Contact: <sip:[EMAIL PROTECTED]> > > Call-ID: [EMAIL PROTECTED] > > CSeq: 102 NOTIFY > > User-Agent: Asterisk PBX > > Event: message-summary > > Content-Type: application/simple-message-summary > > Content-Length: 42 > > > > Messages-Waiting: no > > Voice-Message: 0/0 > > > > Sent to udp:192.168.2.15:5060 at 16/2/2005 09:38:54:330 (267 bytes): > > > > SIP/2.0 404 Not Found > > Via: SIP/2.0/UDP 192.168.2.15:5060;branch=z9hG4bK5e3acadf > > From: "asterisk" <sip:[EMAIL PROTECTED]>;tag=as65dd26cd > > To: <sip:[EMAIL PROTECTED]> > > Call-ID: [EMAIL PROTECTED] > > CSeq: 102 NOTIFY > > Content-Length: 0 > > > > The phone is a Snom 190, running firmware snom190-3.56q-SIP-j.bin > > (from > what > > I can tell). > > > > The only Asterisk configuration I have done was in > sip.conf. I added > > the following entry for the phone: > > > > [test1] > > type=friend ; Friends place calls and > receive calls > > context=from-sip ; Context for incoming calls > from this user > > secret=blah > > language=en ; Use German prompts for this user > > host=dynamic ; This peer register with us > > dtmfmode=inband ; Choices are inband, > rfc2833, or info > > defaultip=192.168.2.60 ; IP used until peer registers > > username=snom ; Username to use in INVITE > until peer > > registers > > mailbox=1234,2345 ; Mailboxes for message > waiting indicator > > restrictcid=yes ; To have the callerid > restriced -> sent as > > ANI > > disallow=all > > allow=ulaw ; dtmfmode=inband only works > with ulaw or > > alaw! > > [EMAIL PROTECTED],2345 ; Mailbox(-es) for message waiting > indicator > > > > The IP of the Snom is indeed 192.168.2.60. Asterisk runs > at 192.168.2.15. > > > > I'm using the latest stable version of *, and it's running > on FreeBSD 5.3. > > I did not build from the ports tree. > > > > What am I missing? When the phone is configured, how do I > verify that > it's > > working? Any help is greatly appreciated! > > > > Thanks in advance, > > Jason > > > > -------------------------------------------------- > > Jason A. Crome > > Senior Software Engineer, DEVNET, Inc. > > E-Mail: [EMAIL PROTECTED] > > http://www.devnetinc.com > > > > _______________________________________________ > > Asterisk-Users mailing list > > [email protected] > > http://lists.digium.com/mailman/listinfo/asterisk-users > > To UNSUBSCRIBE or update options visit: > > http://lists.digium.com/mailman/listinfo/asterisk-users > _______________________________________________ > Asterisk-Users mailing list > [email protected] > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
