Hi!
How do I test if the card is working or not ? Is there something that I canDid you configure groups in sirrix.conf? See http://www.voip-info.org/tiki-index.php?page=Asterisk%20config%20sirrix.conf for examples. You need to set the "number" parameter correctly or simply set "number = +" to receive any call on any number on that port.
do
to get a response from the card ?
Ive put the card in, installed drivers ect but can't dial out and can't see
a
response when I try dial in from external number.
IF you have configured ports in sirrix.conf and you startup Asterik that loads chan_sirrix, you should see some output in /var/log/messages like "Enabling interrupts from ISACx".
When you have configured ports, the LEDs near the RJ45 sockets shall light up as soon as Layer 1 is activated (eg. phone is plugged in). Then you can enable debugging output from Asterisk (logger.conf) and see some details (e.g. when phone requests channel or incoming call is detected), probably you need to start Asterisk in console mode (asterisk -vc).
I hope this could help you. If you have further questions about the Sirrix.PCI4S0 feel free to contact me by eMail [EMAIL PROTECTED]
Regards,
Oskar.
_______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
