I don't believe the adit 600 has an up/down for channels. Are the channels connected to something. You might look at the 'connect' command and see if that helps. To bring the FXS channels up on my box I needed to connect them to the T1 (in your case it would be the MGCP) The t1 syntax is I believe 'connect a:01:1-8 1:1-8' The MGCP should be similiar but would probably be something other than a as it is presumably in a different slot.
As far as more documentation, the adit 600 user manual seems to be plenty adequate (the pdf version is over 12Meg) I believe it is available on their website, if you have problems finding it, contact me offlist and I can send you a copy. Hope this helps, Jon. On Monday 21 February 2005 09:33 am, Daniel Nyström wrote: > I've finally got my Adit 600 and are configuring it right now. > But I have to say, there aren't much documentation for it. > I've setup MGCP and Asterisk seems to find it. > But all channels (40 FXS channels) are "Down"! > But the MGCP itself is "Up" according to the statistics. > I can't find any documents how to set each channel to "Up" in the CLI. > > Any suggestions? > > Thanks! > _______________________________________________ > Asterisk-Users mailing list > Asterisk-Users@lists.digium.com > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
