did you try the auto-config? help-aah will tell you how to do this.
--- BSDR <[EMAIL PROTECTED]> wrote: > I successfully installed [EMAIL PROTECTED] 0.6, but when > i try to load the > wct4xxp module for the TE405P I just got, I get the > following: > > Found TE410P at base address fb7ffc00, remapped to > e0220c00 > TE410P version c01a009b > Tried to load 1c8ac800 into 00000000, but got > 188ac800 instead > Tried to load 1c8ac000 into 00000001, but got > 188ac000 instead > Tried to load 07fc07fc into 00000002, but got > 03fc07fc instead > FALC version: 00000005, Board ID: 00 > Reg 0: 0x188ac800 > Reg 1: 0x188ac000 > Reg 2: 0x03fc07fc > Reg 3: 0x00000000 > Reg 4: 0x00000000 > Reg 5: 0x00000000 > Reg 6: 0xc01a009b > Reg 7: 0x00001f00 > Reg 8: 0x00000000 > Reg 9: 0x00ff0000 > Reg 10: 0x00000000 > TE410P: Launching card: 0 > TE410P: Setting up global serial parameters > Found a Wildcard: Wildcard TE410P-Xilinx > Wildcard USB FXS Interface driver registered > > This is if I haven't yet defined the channels in > zatel.conf. > If I define them the system starts scrolling the > main console with messages > like: > Tried to load 1c8ac000 into 00000001, but got > 188ac000 instead > This goes on and on, and the only way to stop it is > a hard reboot. > > I don't think this is an IRQ problem - when I run > cat /proc/interrupts I get > this: > CPU0 CPU1 > 0: 1905021 1902517 IO-APIC-edge timer > 1: 119 77 IO-APIC-edge keyboard > 2: 0 0 XT-PIC cascade > 8: 1 0 IO-APIC-edge rtc > 12: 1196 1188 IO-APIC-edge PS/2 > Mouse > 14: 2 0 IO-APIC-edge ide0 > 18: 0 0 IO-APIC-level t4xxp > 19: 14144 10091 IO-APIC-level libata > 20: 4208 0 IO-APIC-level eth0 > 23: 0 0 IO-APIC-level ehci-hcd > NMI: 0 0 > LOC: 3807385 3807383 > ERR: 0 > MIS: 0 > > The system is a P4 3000 with 1GB RAM, Intel D915GAV > Motherboard > > Any help would be greatly appreciated. > > > _______________________________________________ > Asterisk-Users mailing list > [email protected] > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > > http://lists.digium.com/mailman/listinfo/asterisk-users > __________________________________ Do you Yahoo!? Yahoo! Mail - 250MB free storage. Do more. Manage less. http://info.mail.yahoo.com/mail_250 _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
