Are you using a Diva SERVER board or just a Diva PCI? I also whant to connect Asterisk with a Siemens HH3000, but I whant to know if it can be done with an Eicon PCI or with a Digium board, because the Eicon DIVA Server 4BRI is very expensive.
Joao Pereira ----- Original Message ----- From: "Peter Svensson" <[EMAIL PROTECTED]> To: "Asterisk Users Mailing List - Non-Commercial Discussion" <[email protected]> Sent: Thursday, February 24, 2005 9:42 AM Subject: Re: SV: SV: [Asterisk-Users] QSIG, Asterisk and Eicon DIVA > On Thu, 24 Feb 2005, Jan Berggren wrote: > > > I have read most of Eicons information on Q.SIG, and I am able to load > > the Q.SIG protocol (instead of ETSI for example). No strange logging in > > divacrtl mlog. > > > > But how do I tell Asterisk to understand Q.SIG? > > Is Asterisk involved on a low enough level to even care about the tansport > mode when using the capi channel? I though Asterisk only requested a call > to be placed or received etc. > > > My PBX is configured for QSIG, but I cannot see anything on my trace > > when trying to make a call via the S0(Q.SIG) > > Are there any debugging / tracing options in capi? > > Peter > > > > _______________________________________________ > Asterisk-Users mailing list > [email protected] > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
