hah ! worked like a bomb ..
Thanks a million. -Herman On Thu, 2005-02-24 at 13:49, Adam Goryachev wrote: > On Thu, 2005-02-24 at 10:20 +0200, Herman Cremer wrote: > > Hi > > > > I was wondering if there are any special settings that > > I need to be able to transfer calls. > > > > Whenever I press the 'recall' button, I just here a click, > > and no ring-tone to transfer. > > in my debug log I get this : > > Probably your phone uses too short flash time. You have a couple of > options, > * change your phone to use a longer flash time > * change asterisk to accept a shorter flash time > * signal the flash some other way (ie, manually press the hook and lift > again > * Use the # key to do the transfer (requires the t or T on the dial > command > > I ended up (finally) succeeding in the second option, which by editing > zaptel with this patch: > > diff -ur zaptel/zaptel.h zaptel.mine/zaptel.h > --- zaptel/zaptel.h Tue Nov 23 10:26:36 2004 > +++ zaptel.mine/zaptel.h Tue Nov 23 17:21:54 2004 > @@ -863,7 +863,7 @@ > #define ZT_DEFAULT_PULSEAFTERTIME 750 /* 750ms between dial > pulse digits */ > > #define ZT_MINPULSETIME (15 * 8) /* 15 ms minimum */ > -#define ZT_MAXPULSETIME (150 * 8) /* 150 ms maximum */ > +#define ZT_MAXPULSETIME (75 * 8) /* 150 ms maximum */ > #define ZT_PULSETIMEOUT ((ZT_MAXPULSETIME / 8) + 50) > > #define ZT_RINGTRAILER (50 * 8) /* Don't consider a ring "over" > until it's been gone at least this > > You should probably apply that manually, due to line wraps etc.. > > Would be nice if this was controlled from the config files... > > Regards, > Adam _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
