On Thu, 24 Feb 2005, Johan Bilien wrote: > On the latter, I can choose the linetype to be one of the following: > > E1Unframed - 2 Mbit/sec unframed signal > E1 - 2 Mbit/sec framed PCM31 signal > E1Crc - 2 Mbit/sec framed PCM31 signal with CRC > E1Mf - 2 Mbit/sec framed PCM30 multiframed signal > E1CrcMf - 2 Mbit/sec framed PCM30 multiframed signal with > CRC > > Since I want to use PRI signaling I have configured zaptel in CCS mode. > So I think the right choice on the other equipment would be "E1", am I > right? Or is it "E1Mf"?
The "E1" setting aboe is for an E1 with *no* signalling channel, a very uncommon configuration. Use E1CrcMf and enable CRC on the asterisk box. E1:s are almost exclusivly run in multiframe mode and with a dedicated signalling channel. Peter _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
