Must have missed a few messages :) Vonage always allowed this on "softphone" lines. Those are $10/month with metered usage (100 min included). They also require a "hardline" (ATA) as the primary line on the account. It's a working crutch for those folks who need a DID in a rate-center only vonage offers -- but that number, thankfully, is decreasing.
> -----Original Message----- > From: Randy Johnson [mailto:[EMAIL PROTECTED] > Sent: Friday, February 25, 2005 6:27 AM > To: [EMAIL PROTECTED]; Asterisk Users Mailing List - > Non-Commercial Discussion > Subject: Re: [Asterisk-Users] Vonage <---> Asterisk Complete Config > > > I thought Vonage did not allow this? > > > -Randy > > > Nitesh Divecha wrote: > > >Hello Asterisk Users, > > > >After Brain storming for couple of hours, days, and weeks, > finally got > >Asterisk to work with Vonage for Inbound and Outbound calls. > > > >Requirement: - > >1) Vonage Softphone account > >2) Asterisk > >3) Couple of SIP Phones > > > >Here is my sip.conf > > > >[general] > >port = 5060 ; Port to bind to (SIP is 5060) > >bindaddr = <<Local IP>> ; Address to bind to (all > addresses on machine) > >context=incoming > >disallow=all > >allow=ulaw > >allow=alaw > >allow=g729 > >allow=g723 > >externip=<<External IP>> > >localnet=<<Local IP>> > >localmask=<<Local mask>> > >nat=yes > > > >register=<<VonageDID>>:[EMAIL PROTECTED]:5061/202 > > > >[vonage-out] > >username=<<VonageDID>> > >type=friend > >secret=<<password>> > >port=5061 > >nat=yes > >host=sphone.vopr.vonage.net > >fromuser=<<VonageDID>> > >fromdomain=sphone.vopr.vonage.net > >dtmfmode=rfc2833 > >auth=md5 > > > >[vonage202] > >username=<<VonageDID>> > >type=friend > >secret=<<password>> > >port=5061 > >nat=yes > >insecure=very > >host=sphone.vopr.vonage.net > >fromuser=<<VonageDID>> > >fromdomain=sphone.vopr.vonage.net > >dtmfmode=inband > >context=from-pstn > >canreinvite=no > >auth=md5 > > > >Here is my extension.conf > > > >[ext-did] > >exten => <<VonageDID>,1,Goto(ext-local,202,1) > >or > >exten => <<VonageDID>>,1,Goto(aa_1,s,1) If you are sending > the call to IVR. > > > >For some this configuration might vary as my Asterisk is behind NAT. > > > >Asterisk Rocks!!! Enjoy > > > >Many thanks to Jay & Dean > > > >Neel > > > > > > > >_______________________________________________ > >Asterisk-Users mailing list > >[email protected] > >http://lists.digium.com/mailman/listinfo/asterisk-users > >To UNSUBSCRIBE or update options visit: > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > > > > > > _______________________________________________ > Asterisk-Users mailing list > [email protected] > http://lists.digium.com/mailman/listinfo/aster> isk-users > To > UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
