I have two Broadvoice "lines" and there's three people in the office. Any way to:
1) "Pool" the connections for "trunking", where any one can get a "free" line?
2) Prevent more than 1 simultaneous call per "line"? (So I will not get hit for 3.9 cents a minute.
I'd like to use the country code AGI.
James
On Fri, 25 Feb 2005 15:52:28 -0500, Christopher McBee <[EMAIL PROTECTED]> wrote:
Here is a copy of my config that works great with broadvoice. I also have an AGI that I wrote to verify country codes so your users can't call countries that aren't included in broadvoices plan. If you want that too, just let me know.
Sip.conf ----------------------------------------------------------------- ; Inbound broadvoice calls register => 8029041486:[EMAIL PROTECTED]/8029041486
[Broadvoice] type=friend username=8029041486 fromuser=8029041486 secret=zjfg9f18fh host=sip.broadvoice.com fromdomain=sip.broadvoice.com port=5060 dtmfmode=inband insecure=very permit=147.135.0.128/32 qualify=yes canreinvite=yes nat=no ----------------------------------------------------------------
-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of [EMAIL PROTECTED] Sent: Friday, February 25, 2005 9:42 AM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [Asterisk-Users] Asterisk With Broadvoice
OK,
After checking into this, I have found the following:
I can set it up so either incoming or outgoing sip calls on this trunk work but NOT both. The "sip show registry" command shows everything as it should be.
The section from my sip.conf is as follows:
[Broadvoice] username = 2xxxxxxxxx type=peer secret=password nat=yes host=sip.broadvoice.com fromuser=2xxxxxxxxxx fromdomain=sip.broadvoice.com dtmfmode=inband canreinvite=no
My registry string is: [EMAIL PROTECTED]:[EMAIL PROTECTED]
If I remove type=peer from [Broadvoice] in sip.conf incoming calls work great but outgoing calls don't work. If i leave type=peer in there, outgoing calls work great but incoming calls get routed to Broadvoice's Voicemail . . .
Roger Hanson wrote:
----- Original Message ----- From: <[EMAIL PROTECTED]> To: <asterisk-users@lists.digium.com> Sent: Thursday, February 24, 2005 10:12 PM Subject: [Asterisk-Users] Asterisk With Broadvoice
I have configured asterisk with the AMP php configuration utility. I
am able to make outgoing calls through broadvoice but incoming calls are sent to BV's Voicemail and never actually enter the IVR. When I show sip debug info through the asterisk prompt it actually reads the
incoming call from BV but then issues a busy signal sending the call to BV's voicemail.
I also modified extensions.conf as follows: [from-sip-external] include => from-pstn
I have set up my sip trunk in AMP as follows:
Trunk Name: Broadvoice Peer Details: dtmfmode=inband fromdomain=sip.broadvoice.com fromuser=21xxxxxxxx host=sip.broadvoice.com qualify=yes secret=password type=peer username=21xxxxxxxx
My Incoming Settings are: User Context: sip.broadvoice.com User Details: context=from-pstn dtmfmode=inband fromdomain=sip.broadvoice.com host=sip.broadvoice.com nat=yes secret=password user=21xxxxxxxx username=21xxxxxxxx
My register string: [EMAIL PROTECTED]:[EMAIL PROTECTED]
Something to double check and something to try (in that order):
1. check your password. It's not the password you registered at their website with. They send you an email with a different password in it you need to use. The password you registered at their website is just for logging into their website.
2. Try using a standard registration string - not the one they show you. Use number:[EMAIL PROTECTED] instead of the one they show you on the website.
See if one of those things is the trouble.
If that doesn't work, look at "sip show registry" and see what's registered. asterisk*CLI> sip show registry Host Username Refresh State sip.broadvoice.com:5060 952225xxxx 15 Registered
_______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
-- James Taylor 3505 Summerhll Road Suite 11 Texarkana, Texas 75503 903-793-1953 _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users