> Me again... I have service with a company that does not allow for a BYOD > plan. They will not give out credential or server info either. Is it > possible to run the FXS port of the ATA to an FXO port in *? > > The service I have is throug Broadvox Direct using the Mediatrix 2102. I > have tried this using loop start and kewl start. The * box sees the > incoming ring, picks up and starts my dial plan. But the Mediatrix never > recognizes that the * box has picked up and continues to ring and then > goes on to voicemail. > > I am beginning to think that this is not possible. Guess maybe I should > have found another provider. I have a number port in progress right now > and cannot stop it.
Sounds like an ata or * config problem to me, but then without any copy/paste of what you've configured, debug data, etc, no one is going to get any closer then throwing a dart at the wall. Is that ata a Cisco or what? So, if you really want some help, try to collect and post some useful data in some reasonable manner. - config data from * for your ata box - config data from * for your extensions.conf - any debug that supports your boxes (eg, sip debug, zap debug, etc) - config data and/or debug data from the ata _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
