So are you saying that in my setup where I have a adit 600 channel bank with FXO/FXS connected to a t110p, that asterisk does an analog bridge? Presumably that would mean 56k modems, etc.. would also work fine. I was under the impression that asterisk used iax2 for the internal trunk.
Jon. On Monday 28 February 2005 08:10 am, Noah Miller wrote: > >> 1) Get a 4-port TDM card and install it into your Asterisk box. > >> Connect the TDM ports to your modem ports. Then forward incoming > >> calls on fax DIDs to those TDM ports. > > > > Digium TDM 4 fxs is not really a good choice for a faxing system. I've > > tested it for a while. > > You should read old messages here about it. > > Faxes coming in from PSTN DID's going directly to a TDM card is a very > good and reliable solution. In this setup the fax call can be directly > bridged from the PSTN to your fax machine with no codecs or lossy > compression, etc. This is exactly the solution I've been using for two > production fax setups, and they have worked under heavy usage without > any issues since I put them in (about 3 months). > > _______________________________________________ > Asterisk-Users mailing list > Asterisk-Users@lists.digium.com > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
