Just a couple of guesses:
Have you configured the switch to supply a VLAN trunk to the phone?
Yes
Since the phone lets you configure actual tagging, that's what it
needs; if you've just enabled VLANs on the switch, and placed the port
the phone is on in a specific VLAN, the phone should not have tagging
enabled.
Exactly, both phone and the switch are configured to use tagging and to use
the same VLAN #
If you've got the switch doing trunk mode on that port, and the phone
set up to use the right VLAN within the trunk, are you perhaps using a
Cisco switch, and have accidentally set it up to use ISL encapsulation
(Cisco's proprietary method) on the trunk? The phone does 802.1Q, so
Cisco switches need "switchport trunk encapsulation dot1q" on the
trunking interface.
No, I am using the HP Pro Curve, Haven't tried Cisco yes but I woul assume
that my switches are operating just fine
Thanks,
Wojtek
-tih
--
Don't ascribe to stupidity what can be adequately explained by ignorance.
_______________________________________________
Asterisk-Users mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
Asterisk-Users mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
