On Tue, 1 Mar 2005, Jason Kawakami wrote: > -----Original Message----- > >> <snip> >> Question is this, there seem to be MANY options technically when ordering >> this PRI (in the US) but since this is the first time ordering a voice >> circuit I am clueless as to what options we need. >> >> Any clues would be helpful or maybe something has already been written about >> this? > > -If you order an "NI2" PRI you will be fine. That will give you name and > number, DID etc. if they want more than that, ESF,B8ZS, NI2, all b-channels > 2-way DID.
There are a lot of other important options you need to get right: * number of digits sent for incoming Called Party Number / expected for outgoing Calling Party Number * expected Type Of Number (TON) for outgoing calls. Same for national / international calls. * B channel hunting order (use the opposite of what the pstn switch uses in Asterisk). * dialtone on empty SETUP (you may as well get this if it is available and free) * enabled callerid, if availalbe and worth the cost. And there are lots and lots of other options. Usually it is a lot cheaper to have options set during the provisioning phase than at a later date. Peter _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
