The dual riser and fritz cards are unrelated. My production system is a C3 Samuel 5000, my development system is an M-1GHz Nemiah with the dual riser card. The dual riser problem is down to the dual riser and am dealing with Tranquil PC on it - although never tried it in the Samuel so thanks for the info.
The Fritz problem is actually me not knowing enough about Linux to get the blasted thing working! -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Leo Ann Boon Sent: 01 March 2005 22:07 To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [Asterisk-Users] mini atx and asterisk (EPIA and the like) See my comments inline Razza wrote: >I run mandrake 9.2, one FXO (x100p clone), 5 sip phones, MusicOnHold, >voicemail, etc. off my EPIA Classic/5000 with 512MB memory (I know 512 >is totally OTT but had a spare SD stick lying around after upgrading my >main PC) and it works fine. > >I would like to also run a Fritz ISDN card but am unable to get this >working in linux, also struggling with the dual active riser card (from >Tranquil PC). Top PCI slot fails to do anything and bottom PCI slot is >great - so avoid multiple cards until tranquil give some useful advice! > > The motherboard must support 2 slot PCI for it to work. IIRC, the Ezra-500/800 can't support 2 slots. The later M10000 Nehemiah boards can support 2 slots. Fritz ISDN works beautifully with M10000. My setup was Trustix 2.l + Fritz CAPI drivers + chan_capi. _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
