That was the fix.
For other people who might be having this problem, I am now using:
exten => _8NXXNXXXXXX,1,Dial(Zap/g1/ww${EXTEN:1})
Thanks!
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Robert
Webb
Sent: Friday, March 04, 2005 1:49 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] Problems dialing out - possible settings
changes
> - About 1 out of every 3 or 4 times my call is actually successful.
>The rest of the time I receive the phone company's "the number you
>called is not in service, please check the number and try your call
again"
>
> - I look at the CLI readout that appears using asterisk
>-vvvvvvvvvvvvcg to start and it shows ZAP/g1/<the correct number>
>
> Evidently something is happening in translating the dtmf codes, but I
>am at a loss. More explanation is in my original post below.
>
Jeff,
Just a thought, have you tried adding a "w" or maybe two to your dial
command to make sure that there is a pause between the time the line is
picked up and the time the * box starts dialing??
Something like:
exten => s,1,Dial(ZAP/g1/ww206391xxxx)
I have seen a couple of people that have had the same issue as you and
this fixed it for them.
Robert Webb
_______________________________________________
Asterisk-Users mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
