Hi All,
Googling X100P Clone I found several information
about these cards and seems that some winmodem has the same chip used from the
original X100P.
Here below a list winmodem which should work as
X100P clone:
1057 Motorola
5608 SM56 PCI Fax Voice Modem E159 Tiger Jet Network Inc 0001 Tiger 300/320 PCI interface I bought one "Trust 56k V92
PCI Internal Modem MD-1100" which has the 1057 Motorola Chip, and I installed it
on my linux box.
in my /proc/pci list it is recognized like
1057:3052 (Motorola) (rev 4)., IRQ 11, I/O at 0x6c00 [0x6cff]
When I try to load the module wcfxo, I cannot load
it (zaptel is already loaded):
[EMAIL PROTECTED] misc]# modprobe
wcfxo
/lib/modules/2.4.22/misc/wcfxo.o: init_module: No such device Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters. You may find more information in syslog or the output from dmesg modprobe: insmod /lib/modules/2.4.22/misc/wcfxo.o failed modprobe: insmod wcfxo failed I cannot undertand if:
1) the message occours because the FXO card use the
same IRQ of the VGA card
2) it occurs because the winmodem installed is not
a valid FXO card.
Some one as experienced this kind of
card?
Regards
MY PCI DEVICES:
[EMAIL PROTECTED] root]# cat /proc/pci
PCI devices found: Bus 0, device 0, function 0: Host bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX Host bridge (rev 3). Master Capable. Latency=64. Prefetchable 32 bit memory at 0xe0000000 [0xe7ffffff]. Bus 0, device 1, function 0: PCI bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge (rev 3). Master Capable. Latency=64. Min Gnt=129. Bus 0, device 7, function 0: ISA bridge: Intel Corp. 82371AB/EB/MB PIIX4 ISA (rev 2). Bus 0, device 7, function 1: IDE interface: Intel Corp. 82371AB/EB/MB PIIX4 IDE (rev 1). Master Capable. Latency=64. I/O at 0xf000 [0xf00f]. Bus 0, device 7, function 2: USB Controller: Intel Corp. 82371AB/EB/MB PIIX4 USB (rev 1). IRQ 11. Master Capable. Latency=64. I/O at 0x6400 [0x641f]. Bus 0, device 7, function 3: Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ACPI (rev 2). IRQ 9. Bus 0, device 10, function 0: Ethernet controller: 3Com Corporation 3c590 10BaseT [Vortex] (rev 0). IRQ 10. Master Capable. Latency=248. Min Gnt=3.Max Lat=8. I/O at 0x6800 [0x681f]. Bus 0, device 13, function 0: VGA compatible controller: Matrox Graphics, Inc. MGA 1064SG [Mystique] (rev 2). IRQ 11. Master Capable. Latency=64. Non-prefetchable 32 bit memory at 0xe8000000 [0xe8003fff]. Prefetchable 32 bit memory at 0xe9000000 [0xe97fffff]. Non-prefetchable 32 bit memory at 0xea000000 [0xea7fffff]. Bus 0, device 14, function 0: Modem: PCI device 1057:3052 (Motorola) (rev 4). IRQ 11. Master Capable. Latency=64. Min Gnt=1.Max Lat=62. Non-prefetchable 32 bit memory at 0xeb000000 [0xeb000fff]. I/O at 0x6c00 [0x6cff]. |
_______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users