ztcfg -vvvv works, too.. after a timing source change... power cycle works.

-----------------------------------------------------
"Yeah, we rocked the vote all right. Those little
bastards betrayed us again."
- Hunter S. Thompson on the 2004 election.

On Fri, 4 Mar 2005, Steven Critchfield wrote:

On Fri, 2005-03-04 at 15:27 -0700, Tom wrote:
Hello,
I have searched and searched, and come up with nothing.  I am running Asterisk
with a wcte110p configured for t1.  Our PRI is staying up, and we can make
calls however our service provider's logs are flooding with errors and we are
getting lots of HDLC Abort (6) on Primary D-Channel Errors.

Our provider says it looks like our box is trying to be the master timer on the
circuit (which is not correct they are providing the timing) we have tried both
span=1,1,0,esf,b8zs and span=1,0,0,esf,b8zs in zaptel.conf both produce the
same problems.  The problem is not in "Asterisk" per se as the errors start
happening as soon as I modprobe the driver and run ztcfg.  As soon as the
circuit comes up the errors start on the provider's end.

Did you make sure to power cycle afterwords? Sometimes the zap cards don't change critical settings like timing once configured.



We are running CVS Asterisk/zaptel/libpri from March 2nd 2005 on Fedora Core 3
fully patched as of last night, I was thinking the problem was with the 2.6
kernel getting preempted and therefore the driver not being able to do its
timings right, however fc3's kernels have preemption disabled by default.  Does
Digium hardware really need/expect a real time OS to run properly?
Like I said previously I think the problem is in the driver itself not in
asterisk.  Any help would be appreciated, and I can code a bit in c so if
someone can point me in the right direction I might be able to fix it myself...

You probably want to dump the FC kernel like a bad habit. Get a plain vanilla kernel and see if that fixes your problems. -- Steven Critchfield <[EMAIL PROTECTED]>

_______________________________________________
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
  http://lists.digium.com/mailman/listinfo/asterisk-users

_______________________________________________
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
  http://lists.digium.com/mailman/listinfo/asterisk-users

Reply via email to