Hi Frank,
I've changed the timing on both spans. That unfortunately has not solved the problem.
I have also removed all of the entries in zaptel.conf and zapata.conf for the analog card, as well as prevented the module from being loaded at boot. So now, as far as the machine knows, it only has the TE405P.
I'm still having the same problem.
Right now I am loading Xorcom Rapid on a test machine with my TE405P installed and see how they handle the config.
Frank Sautter wrote:
Ben Ruset wrote:
I have two Digium cards. One is a TE405P quad T1 card. The other is a TDM40B (I believe) quad analog POTS card.
Our provider has been telling us that they are only seeing one D channel active. This would make sense if somehow only the first T1 in the 405P was activated.
maybe it's a sync problem.
i had trouble with a both the TE405P and a TDM40B in in the same system.
somehow the ztconf or chan_zap is configuring the spans wrong if the kernel module for the TDM40B is loaded before the TE405P. lsmod shows the modules in reversed load order.
set the sync source to span 1: span=1,1,0,esf,b8zs
what are the effects you experience (besides there is no d-channel on one line)?
regards frank sautter _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
