James Pooton wrote:
I'm all so using SJphone on my x50v, works surprisingly well :).
Is voip.elmit.com also in the 192.168.1.X NAT space that your PDA is in?
There might be the problem:
I have the server at two ethernet cards reachable:
Extern with a public IP
Intern with 192.168.250.20
on this internal LAN is a wireless accesspoint, which in return changes the IP address to a network 192.168.1.x
There is a NAT between the internal server IP and the PDA, and there is a nat between internal IP and Internet.
Do you have "host=dynamic" in your * sip.conf entry for 701 ? Actually might help to toss your sip.conf entry out here for 701 without the secret.
[701] ; Test phone 701
type=friend
username=701
secret=very_secret
nat=yes
host=dynamic
context=test_phone canreinvite=yes
disallow=all
allow=ulaw
allow=alaw
dtmfmode=rfc2833
qualify=1000
[EMAIL PROTECTED]
pickupgroup=1
qualify=yes
Do you see any connection attempts on the console? (ie starting * with -gcvvvvvv)
No, not at all!!
bye
Ronald
Your not far off..
-James
-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Ronald Wiplinger Sent: Sunday, March 06, 2005 8:56 AM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [Asterisk-Users] SJphone on PDA registering with Asterisk???
C. Tomlinson wrote:
Ronald,
You will need to give *more* information than that....
I have SJphone on my PDA, and have setup a SIP account on *, and it works fine :-)
I take it you have setup sjphone to register to *. I take it your PDA has a network connection?
I have setup a sip account at asterisk (701:password) I have an asterisk (voip.elmit.com with an IP address)
I have setup a new profile on the PDA sip-elmit:
Initialization: as suggested
Sip proxy: Proxy domain: <my IP address> Port 5060 Userdamain: <voip.elmit.com
Advanced options (nothing set)
Sip: Expose software version Enable STUN unsage
Redirection: nothing selected
STUN: as suggested
Use elimit-sip "elmit-sip in use"
(save changes)
Display shows: elmit-sip SIP: registering as sip:[EMAIL PROTECTED] ... Host address: 192.168.1.101 NAT/Firewall: Full Cone NAT
------------------ Ronald (office) (Ro) sip:[EMAIL PROTECTED]
click on dial
Nothing happens, .. not registered in *, ...
What have I done wrong?
bye
Ronald
-- Ronald Wiplinger (CEO of ELMIT) http://www.elmit.com +886 (0) 939--77-55-16 or FWD 511208 - I'm a SpamCon Foundation Member, #694, Verify it at http://www.spamcon.org
PS: Spam prevention!
Our system is protected with a spam prevention program. If you send us an e-mail, our system will send you a confirmation message back. Just reply to this confirmation message please. After receiving this confirmation message, our system will send the hold message (one) and all future messages (after the received confirmation message) to me without asking you again.
_______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
