Here are some config files: sip.conf
[general]
register => 222:[EMAIL PROTECTED]:5060/222
register => 111:[EMAIL PROTECTED]:5060/111
port = 5060
tos=lowdelay
jitterbuffer=yes
maxjitterbuffer=yes
maxjitterbuffer=500
maxexcessbuffer=100
bindaddr = 0.0.0.0
allow=all
;allow=ilbc
;allow=alaw
context = fullaccess
[111]
type=friend
;host=xx.xx.xx.xx
host=dynamic
username=111
secret=mysecret
context=sip-access1
callerid="Philip 2" <111>
;reinvite=no
;caninvite=no
;qualify=500
nat=yes
allow=all
;allow=gsm
;dtmfmode=rfc2833
[222]
type=friend
;host=xx.xx.xx.xx
host=dynamic
username=222
secret=mysecret
context=sip-access2
callerid="Philip Lee" <222>
;reinvite=no
;caninvite=no
;qualify=500
nat=yes
allow=all
;allow=gsm
;dtmfmode=rfc2833
capi.conf
[general]
;mode=immediate
;isdnmode=multipoint
nationalprefix=0
internationalprefix=00
rxgain=0.8
txgain=0.8
[interfaces]
msn=0
incomingmsn=0
;overlapdial=yes
;outgoingmsn=01912500900
controller=1
;softdtmf=1
;accountcode=
context=capi-access1
mode=immediate
isdnmode=ptp
devices=2
;echosquelch=1
;echocancel=yes
;echotail=64
;callgroup=1
;deflect=
msn=9
incomingmsn=*
controller=1
context=capi-access2
mode=immediate
isdnmode=ptp
devices=2
msn=0
incomingmsn=0
controller=1
context=capi-access1
mode=immediate
isdnmode=ptp
devices=2
msn=9
incomingmsn=9
controller=1
context=capi-access2
mode=immediate
isdnmode=ptp
devices=2
msn=0
incomingmsn=*
controller=1
context=capi-access1
mode=immediate
isdnmode=ptp
devices=2
extensions.conf
[general]
static=yes
writeprotect=yes
[noaccess]
exten => _.,1,Congestion
[sip-access1]
exten => 222,1,Dial(SIP/222,20,tr)
exten => 11111,1,Dial(IAX2/user1,20,tr)
exten => 22222,1,Dial(IAX2/user2,20,tr)
exten => 333,1,Dial(CAPI/01912500900,30)
exten => 444,1,Dial(CAPI/01912500909,30)
[sip-access2]
exten => 111,1,Dial(SIP/111,20,tr)
exten => 22222,1,Dial(IAX2/user2,20,tr)
exten => 11111,1,Dial(IAX2/user1,20,tr)
exten => 333,1,Dial(CAPI/@01912500900,30)
exten => 444,1,Dial(CAPI/@01912500909,30)
[iax-access1]
exten => 111,1,Dial(SIP/111,20,tr)
exten => 222,1,Dial(SIP/222,20,tr)
exten => 22222,1,Dial(IAX2/user2,20,tr)
;exten => 11111,3,Voicemail(u11111)
exten => 333,1,Dial(CAPI/01912500900,30)
exten => 444,1,Dial(CAPI/01912500909,30)
[iax-access2]
exten => 11111,1,Dial(IAX2/user1,20,tr)
exten => 111,1,Dial(SIP/111,20,tr)
exten => 222,1,Dial(SIP/222,20,tr)
exten => 333,1,Dial(CAPI/@01912500900,30)
exten => 444,1,Dial(CAPI/@01912500909,30)
[capi-access1]
exten => 11111,1,Dial(IAX2/user1,20,tr)
exten => 111,1,Dial(SIP/111,20,tr)
exten => 22222,1,Dial(IAX2/user2,20,tr)
exten => 222,1,Dial(SIP/222,20,tr)
exten => 444,1,Dial(CAPI/01912500909,30)
[capi-access2]
exten => 11111,1,Dial(IAX2/user1,20,tr)
exten => 111,1,Dial(SIP/111,20,tr)
exten => 22222,1,Dial(IAX2/user2,20,tr)
exten => 222,1,Dial(SIP/222,20,tr)
exten => 333,1,Dial(CAPI/01912500900,30)
Also here is some debug info. This is from when I make a call to one of the msn
numbers from an ISDN phone. The ISDN phone rings but the other endpoint
(softphone) does not ring and no connection is established.
*CLI> capi debug
CAPI Debugging Enabled
*CLI> -- CONNECT_IND ID=001 #0x0004 LEN=0028
Controller/PLCI/NCCI = 0x101
CIPValue = 0x1
CalledPartyNumber = <81>0
CallingPartyNumber = default
CalledPartySubaddress = default
CallingPartySubaddress = default
BC = <80 90 a3>
LLC = default
HLC = default
AdditionalInfo = default
Mar 7 15:43:29 NOTICE[10058]: chan_capi.c:1931 capi_handle_msg: CONNECT_IND
ID=001 #0x0004 LEN=0028
Controller/PLCI/NCCI = 0x101
CIPValue = 0x1
CalledPartyNumber = <81>0
CallingPartyNumber = default
CalledPartySubaddress = default
CallingPartySubaddress = default
BC = <80 90 a3>
LLC = default
HLC = default
AdditionalInfo = default
== CONNECT_IND (PLCI=0x101,DID=0,CID=(null),CIP=0x1,CONTROLLER=0x1)
-- INFO_IND ID=001 #0x0005 LEN=0017
Controller/PLCI/NCCI = 0x101
InfoNumber = 0x70
InfoElement = <81>0
-- INFO_IND ID=001 #0x0006 LEN=0016
Controller/PLCI/NCCI = 0x101
InfoNumber = 0x18
InfoElement = <8a>
-- DISCONNECT_IND ID=001 #0x0007 LEN=0014
Controller/PLCI/NCCI = 0x101
Reason = 0x0
== DISCONNECT_IND PLCI=0x101 REASON=0
Mar 7 15:43:39 WARNING[10058]: chan_capi.c:1380 pipe_msg: unable to hangup
channel on DID. Channel is NULL.
-----Original Message-----
From: [EMAIL PROTECTED] on behalf of tim panton
Sent: Mon 3/7/2005 3:28 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Cc:
Subject: Re: [Asterisk-Users] SIP and ISDN
On 7 Mar 2005, at 14:27, <[EMAIL PROTECTED]> wrote:
> I have set up an Asterisk PBX server and can make calls between
> endpoints using both the SIP and IAX protocols. Iam using X-Lite
> softphone to make SIP calls and DIAX softphone to make IAX calls. The
> next step is to get an ISDN line connected and ISDN phone able to make
> calls to either a SIP or IAX softphone.
>
> So far I have managed to install an AVM Fritz card along with the
> drivers and CAPI. I can attempt to make a call to a softphone but the
> call cannot be connected. The Asterisk PBX does process the call and
> displays the msn that the ISDN phone is tring to call but the
> softphone does not ring and no call is established.
>
> Any configuration ideas on how I can get this to work? Is there
> anything I have missed?
>
> Here is a diagrammatical explanation:
> PC - Softphone
> | Ethernet Line
> Asterisk PBX
> | ISDN line
>
> ISDN phone
>
> Any suggestions will be a great help.
>
You'll need to send us some debug logs and snippets of config files for
us to
help you with this problem.
At a pure guess I'd say you need to add some lines to extensions.conf
we will know more if you send more info.
Tim.
http://www.westhawk.co.uk/
<<winmail.dat>>
_______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
