You da man! Thanks.
Regards, Juan Staalenburg Teksavers, Inc. (512) 255-8395 x1002 AIM: juanteksavers -----Original Message----- From: Rich Adamson [mailto:[EMAIL PROTECTED] Sent: Tuesday, March 08, 2005 2:19 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [Asterisk-Users] Cisco 7940 Upgrade Failing > Does anyone know how to get a Cisco 7940 w/FW ver 2.0.3 to v3x and above. > Can't get it to upgrade on its own via TFTP. Phones w SCCP image will > upgrade fine but I can't get these 2.0.3s to start the firmware upgrade. On some older 79x0's, we've had to delete a bunch of the config statements within the *.cnf files in order to upgrade. Deleting comments and the majority of statements won't have any impact in terms of upgrading, just make sure you keep a full copy of the files around so that once the upgrade is complete, you know what parameters were there to start with. The above is based on upgrading several used 79x0's (with experience). Seems not all phones were created equal (eg, maybe differences in buffer sizes, nvram, or something). I never did try to figure out why some worked and some did not without deleting that stuff. _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
