I fought with this and made the same discovery you did. I'm not happy with my solution, but I have SPA-3000s set up in a "hotline" mode. when a call comes into them from the Nortel ATA it is automatically routed to an Aserisk Extension. I hope somebody else chimes in with an ATA setting to change or something.
-Nate -----Original Message----- From: Carlos Chavez [mailto:[EMAIL PROTECTED] Sent: Tuesday, March 08, 2005 3:30 PM To: Asterisk Subject: [Asterisk-Users] Nortel ATA not passing dtmf tones to fxo I am trying to integrate a Nortel Norstar system with an Asterisk service using a TDM04B card (4 fxo). So far everyting works from Asterisk to Nortel. The problem is when someone dials from the Nortel PBX to the Asterisk server. Asterisk answers the call and provides a dialtone (with DISA) but appartently the DTMF tones are not passed to asterisk and the call cannot proceed. This only happens when calling from a digital phone on the Nortel. If I connect an analog phone to the PBX and dial from there the call can go through. Anyone has experience with this? -- Carlos Chavez Director de Tecnolog�a Telecomunicaciones Abiertas de M�xico S.A. de C.V. Tel: +52-55-91169161 Ext 2001 _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
