Not sure what the default value is, but seems to me it was something like 100 (for = yes). If I recall correctly from the days when this was implemented, it represents a delay in milliseconds from the time a zap channel is seized until the echotraining sequence is initiated.
For my system with a TDM04b, =800 does a good job. Try different values on your system to see what the minimum value is that improves your echo issues. ------------------------ > I thought echotraining=400 was the default? > > > Cheers, > Dean > > > -----Original Message----- > > > I am using asterisk with a handful of DM04B cards. Everything seems > fine except for an echo on > all calls on the local end of the call. In almost > > all cases the echo goes away after 15 to 20 seconds. I am attributing > the echo going away to > the echo cancellation code that was enabled when > > the following options are set: > > > > echocancel=yes ; > > echocancelwhenbridged=yes > > echotraining=yes ; > > Instead of echotraining=yes, use echotraining=800 and don't forget > to 'stop' and restart asterisk. A simple reload won't cut it. _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
