Hi all:
I've been developing and testing on a tdm400p card and it's been going well.
As you probably know, the tdm400p needs an ide power supply, but the dell poweredge 2600 that this card is destined for eventually has all the power supplied on the backplane with no ide cables.
I used a molex splitter from another drive.
On the topic of the dell 2600, I had to change servers as I could not get the t100p and tdm400p on their own irq's (It also had the raid card which is not supported in the new megaraid driver, but that is another story). Anyway in the bios, I could only set the irq to share with the raid controller or the gigabit ethernet. I was getting tons of irq misses which caused frame slips (and bad echo) on the t1.
Anyway, please let me know how it goes and watch for irq misses.
** This was a while back, and it could have been a 2650, so please verify this for yourself **
Jeb Campbell [EMAIL PROTECTED] _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
