> -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of > Aaron Glenn > Sent: Wednesday, March 09, 2005 5:25 PM > To: [email protected] > Subject: [Asterisk-Users] zaptel configuration issues > (zaptel.conf vs. zapata.conf)
[snip] > I'm running a stock [EMAIL PROTECTED] 0.6 install and after four days of > excrutiatingly annoying debugging, I finally came across the > obvious problem. The zaptel driver is reading > /etc/zaptel.conf; which by default configures one FXS > Kewlstart channel. Asterisk, according to "full" log, will > see the first channel, then fail to load chan_zap.so and not > configure channels 2 through 4 (I have a TDM400p card in the > box...at least I think that's what it is) [snip] Aaron, I just setup a TDM11B (one FXS module on channel 1 and one FXO on channel 4) Here is the /etc/zapata.conf that I used with [EMAIL PROTECTED] 0.6 to get that working: fxoks=1 fxsks=4 loadzone = us defaultzone=us Then, I replaced /etc/asterisk/zapata.conf with this: [channels] language=en busydetect=yes busycount=6 cidsignalling=bell cidstart=ring callerid=asreceived busydetect=yes busycount=6 ; this section is for the fxs port (telephone instrument) echocancel=yes echocancelwhenbridged=yes rxgain=0.0 txgain=0.0 callgroup=1 pickupgroup=1 immediate=no signalling => fxo_ks channel => 1 ; this section is for the fxo port (pstn line) context=from-pstn ; <==== where to send incoming calls within extensions.conf usecallerid=yes hidecallerid=no callwaiting=yes usecallingpres=yes threewaycalling=yes cancallforward=yes callreturn=yes echocancel=yes echotraining=800 echocancelwhenbridged=yes rxgain=0.0 txgain=0.0 callgroup=1 pickupgroup=1 immediate=no signalling => fxs_ks channel => 4 Now, I think that AAH, via AMP, overwrites /etc/asterisk/zapata.conf and that maybe one ought to place all custom changes to in the /etc/asterisk/zapata-channels.conf file. Frankly, though, this is all supposition and my setup is currently working for me using the /etc/asterisk/zapata.conf file. FYI, for me the genzaptelconf command is not working to correctly set up my TDM11B HTH, Tom _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
