mine works fine. I configured it entirely through amp. I will post my config tonight.
On Thu, 10 Mar 2005 18:09:12 -0600, James Taylor <[EMAIL PROTECTED]> wrote: > Put this in sip.conf with the phpconfig: > > register => > [EMAIL PROTECTED]:password:[EMAIL PROTECTED]/phone_number > [sip.broadvoice.com] > type=peer > user=phone > host=sip.broadvoice.com > fromdomain=sip.broadvoice.com > fromuser=phone_number > secret=password > username=phone_number > insecure=very > context=from-pstn > authname=phone_number > dtmfmode=inband > dtmf=inband > ;Disable canreinvite if you are behind a NAT > canreinvite=no > > Then go into AMP and set up your DID number and point it to an extension. > > I never could get the SIP in AMP to work properly. > > James > > On Thu, 10 Mar 2005 18:32:09 -0500, Tom Rymes <[EMAIL PROTECTED]> > wrote: > > > Egad, not again with Broadvoice! Anyhow, I recently installed AAH and > > configured my TDM11B and got that and some SIP phones working. I still > > have some issues to work out, etc, but my current problem is Broadvoice. > > > > I have checked out all of the online resources, including the recent > > list exchange about the recent changes made by Broadvoice. However, the > > one thing I have found to be consitent in all of the online info is that > > nothing consistently works.... > > > > I have tried to combine the tutorial by William Pool at > > http://lists.digium.com/pipermail/asterisk-users/2005-January/086337.htm > > l with the latest instructions from Dan Weber at > > http://foo.robotics.net/mediawiki-1.3.10/index.php/Asterisk_Setup . This > > has not worked. Right now, "sip show registry" shows this: > > > > Host Username Refresh State > > sip.broadvoice.com:5060 [EMAIL PROTECTED] 120 Auth. Sent > > > > I added this to my sip.conf: > > > > externip=xxx.xxx.xxx.xxx > > localnet=10.1.0.0 > > localmask=255.255.0.0 > > nat=yes > > My /etc/asterisk/sip_additional.conf contains this relevant portion: > > > > register=> > > [EMAIL PROTECTED]:pppppppppp:[EMAIL PROTECTED]/2 > > 00 > > > > [from-broadvoice] > > username=nnnnnnnnnn > > user=nnnnnnnnnn > > type=user > > secret=pppppppppp > > nat=yes > > insecure=very > > host=sip.broadvoice.com > > fromdomain=sip.broadvoice.com > > dtmfmode=inband > > context=from-pstn > > > > [sip.broadvoice.com] > > username=nnnnnnnnnn > > user=nnnnnnnnnn > > type=peer > > secret=pppppppppp > > nat=yes > > insecure=very > > host=sip.broadvoice.com > > fromuser=nnnnnnnnnn > > fromdomain=sip.broadvoice.com > > dtmfmode=inband > > dtmf=inband > > context=from-pstn > > canreinvite=no > > authname=nnnnnnnnnn > > > > Here are my two questions: > > > > 1.) Does anyone have a summary of what to input into AMP to properly > > setup Broadvoice? The tutorial by William Pool looked hopeful, but no > > such luck. > > > > 2.) Can anyone see the painfully obvious screwup I made here? For > > whatever reason this isn't working, and I can't find any consistent > > answers on Broadvoice. > > > > Thank you for your consideration, I have been documenting my progress so > > I can share the results with the community once completed. > > > > Tom > > > > > > > > _______________________________________________ > > Asterisk-Users mailing list > > [email protected] > > http://lists.digium.com/mailman/listinfo/asterisk-users > > To UNSUBSCRIBE or update options visit: > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > > -- > James Taylor > MetroTel > 3505 Summerihll Road > Suite 11 > Texarkana, Texas 75503 > 903-793-1956 > _______________________________________________ > Asterisk-Users mailing list > [email protected] > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
