|
I am no expert but I hope I can be of
help.
What is your /etc/zaptel.conf and
/etc/asterisk/zapata.conf?
There is 2 points it can be a problem that I have found,
the cable, as depending on requirements a normal patch lead or a specific pin
cross over cable maybe needed.
The other place is the span setup in the zaptel.conf and
the signalling in the zapata.conf
Depending on where in the world you are will dictate the
span setup for the E1.
Have a read of
It helped me out with the span configuration
requirements.
James From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Callum McGillivray Sent: Friday, 11 March 2005 4:22 PM To: asterisk-users@lists.digium.com Subject: [Asterisk-Users] E1 LED not lighting up.... Hi all, Having an issue in getting our first
asterisk server recognising the channels on our E1. At the moment, when we start up the
machine, everything goes well, but the light on our single span TE110P card
flashes red (slowly). I imagine that I’m supposed to get a
green light when a connection has been made. (lol – else I’m not sure what it’s
there for :P) Can anyone give me some pointers as
to what I should be looking for here? I’m pretty new to this and I’m eager
to get it up and running. Cheers, Callum |
_______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
