Goutam Shaw wrote:
Hi I have a strange situation. Once in a while (non-deterministic) the 2 TDM04B cards lock up at the same time and stop processing incoming and outgoing calls even though * shows that it is trying to communicate to ZAP channels (at least on the outgoing). The only cure is to reboot the system when it happens. It makes me very apprehensive of the system
Has anyone seen this problem. Could this be something to do with the IRQ sharing. Here is the output of lspci -v.
Get the cards on their own interrupts - use the BIOS, turn off unneeded onboard devices etc.
If you still have problems and the FXO modules are marked "Rev C" on the non pin side, talk to Digium support.
I had ongoing problems with FXO modules stopping responding and requiring reboots to restore. Regdumps of the offending module show "ff" loaded in almost all registers.
After contacting Digium, I was told this was a hardware issue and after having them replaced with modules marked "X100B RevB", I have so far had no problems.
Regards,
Richard _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
