Really, really, really
THANKS
----- Original Message ----- From: "Wilson Pickett" <[EMAIL PROTECTED]>
To: "Asterisk Users Mailing List - Non-Commercial Discussion" <[email protected]>
Sent: Sunday, March 13, 2005 11:11 AM
Subject: Re: [Asterisk-Users] Unable to create channel of type 'IAX2'
Where is the mistake?
Right here
[local] exten => _XXXXXXXXXX,1,Dial(IAX2/${EXTEN})
You are telling it to dial ALL 10 digit numbers using IAX. What you need to do is have an extension that determines if a call is meany for the X100P and if so the dial would be
exten => _XXXXXXXXXX,1,Dial(ZAP/1/${EXTEN})
ZAP/1 is your X100p FXO.
Take a good look at http://www.asteriskdocs.org which was entirely written to help you understand channels, extensions and dialplans. These are the essential building blocks to get you going.
You will need further knowledge to separate internal extensions from external phone numbers. Often internal extensions are numbered like 2000,2001,2002...
exampleexten => _2XXX,1,Dial(IAX2/${EXTEN}) ; hand all 4 digit numbers that begin with 2_______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
