check your entensions.conf file /etc/asterisk/extensions.conf
..... ${ETEN:${TRUNKMSD}})we had same problem this was the fix
----- Original Message ----- From: "Matthew Boehm" <[EMAIL PROTECTED]>
To: "Asterisk Users" <[email protected]>
Sent: Sunday, March 13, 2005 1:23 PM
Subject: [Asterisk-Users] PRI Call Reference Length not Supported
Using CVS-HEAD libpri, CVS-HEAD zaptel, CVS-STABLE asterisk.
Everything compiled fine. No problems loading chan_zap.so.
Incomming calls to PRI work fine. Outbound is a different story:
-- Executing Dial("SIP/64.72.107.4-4122fb40", "ZAP/R1d/18005551212|60") in new stack -- Called R1d/18005551212 -- Channel 0/23, span 1 got hangup Mar 13 13:19:29 WARNING[28835]: chan_zap.c:7149 zt_pri_error: PRI: Call Reference Length not supported: 0 -- Zap/23-1 is circuit-busy -- Hungup 'Zap/23-1' == Everyone is busy/congested at this time
I've never experienced this before. Anyone have any ideas? I'm going to revert back to STABLE versions of libpri and zaptel and see if I get the same error.
-Matthew
_______________________________________________
Asterisk-Users mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
