I'm having the same problem over here, but with both, inbound/outbound calls, I use a SER server >auth my users, and when I need to use a VoIP line that is not at my server, I use Asterisk to auth >line outside my server at my Foreign Voip server then when I get the line I can dial, but none of >them, incoming/outgoing, calls are working fine. How did you configure your incoming call
I don't use SER but as far as inbound Provider->asterisk it 'just worked out of the box' without any problems for me. Making sure that
- authentication parameters are correct with sip.conf,
- you are registering with them fine
- registration line has a /internalextension after it so it knows where to put the inbound call
- corresponding entry in extensions.conf relating to the above - internal extension above dialing a physical phone / group or whatever.
- asterisk ports are open / accessible from your provider
- codecs are compatible
also
- if you are making config changes to try and get things to work u r better to stop and restart asterisk rather than 'sip reload'
- try both cvs and an older version, sometimes things break
- if you have multiple cards in the machine use nat=yes for the outbound provider to force asterisk to use the correct IP address in the sip messages.
- I would use asterisk for a test setup and once that is working add SER to the equation.
- try a few different providers to make sure any problems are not provider specific.
NOTE these are notes from someone who CAN'T get SIP outbound calls to be placed correctly so take it with a bag of salt.... lol ... Good luck.
Walt
_________________________________________________________________
Express yourself instantly with MSN Messenger! Download today it's FREE! http://messenger.msn.click-url.com/go/onm00200471ave/direct/01/
_______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
