1 Transcoding is between codecs.  ulaw to g.729 for example
 
2  I prefer AMP but unless you install it with [EMAIL PROTECTED] it could be a pain.
 
3.  You need a clock source for meetme and other features to work so if you don't have any digium hardware you must use ztdummy
 
4.  Unless you are using a VPN or STUN you must open the port in your firewall manually
 
In addition if you search on google by 'list.digium.com : whatever subject'  you could find the answers to a lot of questions.
 
Have a good day,  I hope this helps you get on your way.
 
Henry
----- Original Message -----
Sent: Tuesday, March 15, 2005 10:56 AM
Subject: [Asterisk-Users] Asterisk Newbie

Hello all
I have been learning * from almost 1 month now. It looks really powerfull. I have some problem trying to find previous post, or solutions to common problems, advice to newbies etc in this mailing list. There is no  a forum-like tool to search thru the posts by keyworks for example. Please correct me if I am wrong.
 
That is why I will post my questions here:
1- Transcoding: is this when you go from g711 to g729 for example? Or when you go from SIP to IAx?
2- What is the best GUI tool to configure  * ?
3- Do I need to install a PCI (fxo or fxs) to have meetme, music onnhold etc?
4- If I have a SIP device behind a firewall the supports SIP transformations (sonicwall pro230) and the * is outside the firewall, do I have to open ports 5060 anyway?
What about the audio?
 
Regards
 
Fabian
 


_______________________________________________
Asterisk-Users mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
Asterisk-Users mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users

Reply via email to