Marios, I don't think you quite understand my issue. The ata in my apartment is behind a nat, and it always has had canreinvite=no. But my question deals not with my sipura device, but calls entirely contained within the * server (which again, is a live IP machine). A call comes in from broadvoice to the * server, then the * server tries to forward that call out through broadvoice and out to another number, a la Dial(SIP/broadvoice/##########). There should be no need for canreinvite=no set for the broadvoice peer, but the call forwarding will not work unless reinvite is disabled. There is no issue with nat or anything here, entirely internal routing, but for some reason, it does not work.
If anyone has some time, can they try this and see if they have a similar error? The only condition is that the * server will need to be on a live IP. set canreinvite=yes for the broadvoice peer. setup your dial plan such that an incoming broadvoice call is answered and then forwarded to a PTSN number through broadvoice again. In my case, this does not work unless I set canreinvite=no for the broadvoice peer. Does anyone experience the same issue? I'd like to know if there is a problem on my side or if this is just a complication of the new changes broadvoice made. Perhaps someone knows why this is happening anyhow, without having to test it. All thoughts are welcome. I'm not sure if this post will reply properly to the thread (my last one didn't) so just in case, links to the previous threads are below: http://lists.digium.com/pipermail/asterisk-users/2005-March/094744.html http://lists.digium.com/pipermail/asterisk-users/2005-March/094812.html Paul _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
