I've been beating my head a bit against the 1.0.6 Debian builds of Asterisk, using an E100P (E1, single span) board.
In machines I've built in the past (back in 1.0.0 days), config I'm
using and that card and 1.0.0 driver combo worked fine.
ztcfg reports no problems:
SPAN 1: CCS/HDB3 Build-out: 0 db (CSU)/0-133 feet (DSX-1)
31 channels configured.
And zttool sees the card, and reports it in the state I expect (there's
no real E1 attached to it, so blue/red alarms..)
But * won't bring up chan_zap at all:
ERROR[2215]: Signalling requested is PRI Signalling but line is
in Unknown signalling 896 signalling
ERROR[2215]: Unable to register channel '1-30'
WARNING[2215]: chan_zap.so: load_module failed, returning -1
WARNING[2215]: Loading module chan_zap.so failed!
Ideas? I'm sure it's something simple I've missed. :)
Config fragments follow:
==/etc/zaptel.conf==
span=1,0,0,ccs,hdb3
bchan=1-15,17-31
dchan=16
loadzone=nz
defaultzone=nz
==end==
==/etc/asterisk/zapata.conf==
context = default
switchtype = euroisdn
priindication = outofband
group = 2
signalling = pri_cpe
channel => 1-30
==end==
Thanks.
--
David Zanetti <[EMAIL PROTECTED]>
Team Leader, Systems Administration
Catalyst IT Limited
+64-4-8032233 +64-21-402260
signature.asc
Description: This is a digitally signed message part
_______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
