On Wed, 2005-03-16 at 18:25, Steve Underwood wrote: > Hi Vladyslav, > > The log looks good so far. The far end has negotiated. The fast modem > has been tested. Transmission of the first page has been. What happens > next. I don't think the log really stopped at that point. Did you wait > long enough for the page transmission to complete?
After that point "Changed from phase 3 to 6" fax machine says "Incomplete" + error code. And that's all. BTW, Fax machine connected via SIPURA-2000 (which registered directly on * and use ulaw) But I could receive fax from PSTN via *->SIPURA->Fax machine > > Regards, > Steve > > > Vladyslav wrote: > > >Here is new one : (but it's spandsp-0.0.2pre10) > > > >*CLI> -- Executing NoOp("SIP/103-dfb6", "") in new stack > > -- Executing AGI("SIP/103-dfb6", "set-timestamp.agi") in new stack > > -- Executing System("SIP/103-dfb6", "echo "16032005-18:15:06 - > >"VladK" <103> - SIP/103-dfb6 - 901" >> /var/log/asterisk/calls") in new > >stack > > -- Executing DBput("SIP/103-dfb6", "RepeatDial/103=901") in new > >stack > > -- DBput: family=RepeatDial, key=103, value=901 > > -- Executing DBget("SIP/103-dfb6", "recv=Record/103") in new stack > > -- DBget: varname=recv, family=Record, key=103 > > -- DBget: set variable recv to on > > -- Executing GotoIf("SIP/103-dfb6", "1?7:9") in new stack > > -- Goto (from-sip,901,7) > > -- Executing SetVar("SIP/103-dfb6", > >"CALLFILENAME=20050316-181506-103-901") in new stack > > -- Executing Monitor("SIP/103-dfb6", "wav|20050316-181506-103-901") > >in new stack > > -- Executing Goto("SIP/103-dfb6", "from-sip-post|901|1") in new > >stack > > -- Goto (from-sip-post,901,1) > > -- Executing Answer("SIP/103-dfb6", "") in new stack > > -- Executing TxFAX("SIP/103-dfb6", "/tmp/testfax.tif|caller") in new > >stack > >Slow carrier up > >Mar 16 18:15:10 NOTICE[10168]: rtp.c:540 ast_rtp_read: Unknown RTP codec > >100 received > >Slow carrier down > >Slow carrier up > >Slow carrier down > >Slow carrier up > ><<< NSF: 20 00 00 79 00 00 00 82 0f 09 03 10 10 00 02 95 80 9c f8 80 40 > >01 49 02 41 52 41 59 4f 5a 20 55 4b 52 41 49 4e 45 23 20 03 > >NSF without final frame tag > >The remote was made by 'Panasonic' > ><<< DIS: 80 20 ee 99 84 80 11 > >DIS with final frame tag > >In state 10 > >DIS: > > V.8 capable > > Prefer 256 octet blocks > > Can receive fax > > Supported data signalling rates: V.27ter, V.29 and V.17 > > R8x7.7lines/mm and/or 200x200pels/25.4mm > > 2D coding > > Scan line length: 215mm or 255mm > > Recording length: A4 (297mm) and B4 (364mm) > > Receiver's minimum scan line time: 5ms at 3.85 l/mm: T7.7 = T3.85 > > Error correction mode > > R8x15.4lines/mm > > Metric-based resolution preferred > > Minimum scan line time for higher resolutions: T15.4 = T7.7 > >DCS: > > Can receive fax > > Selected data signalling rate: V.29, 9600bps > > 2D coding > > Scan line length: 215mm > > Recording length: A4 (297mm) > > Minimum scan line time: 20ms > > Minimum scan line time for higher resolutions: T15.4 = T7.7 > >Start sending document > >Start tx document > >Changed from phase 2 to 4 > > > > > >>>>DCS: 83 00 c6 80 80 80 00 > >>>> > >>>> > >HDLC underflow in state 3 > >Changed from phase 4 to 6 > >Changed from phase 6 to 3 > >Slow carrier up > ><<< CFR: 84 > >CFR with final frame tag > >In state 4 > >Trainability test succeeded > >Start tx page > >Slow carrier down > >Changed from phase 3 to 6 > > > >*CLI> show ch > >channel channels channeltypes > >*CLI> show channels > > Channel (Context Extension Pri ) State Appl. > >Data > >0 active channel(s) > > > > > > _______________________________________________ > Asterisk-Users mailing list > Asterisk-Users@lists.digium.com > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users