> > Well, incoming call handling on SPA-3000 kind of sucks at the > > moment... but I don't see how it could be configured to ring a bunch > > of phones anyway. At best it can deliver the call to a single > > gateway/proxy, and even it really wants to answer the line first and > > present a second dial tone to the caller before doing so. If the call > > is just going to go into an Asterisk server for routing to "ring all > > the phones", then IMO it'd just be easier to skip the SPA-3000 > > completely. > > It isn't hard to make an incoming POTS call to the spa-3k ring all the > phones. > > 1) set up an extension that rings all the phones. > > exten => 6666,1,Dial(sip/6001&sip/6002&sip/6003&sip/6004&..sip/N) > > Have the spa3k use an "S0" dialplan: > > PSTN Line: > ... > Dial Plan 8: (S0 <:6666> ) > ... > PSTN Caller Default DP: 8 > > Too bad the spa3k software lacks a way to save a dialplan or to diff > it against factory defaults. It makes it kind of hard to post a > definitive recipe.
Ain't that the truth!!! Almost bad enough to write some code to do that. :( _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
