We switched out our Cisco AS5300 with a new TE410P card, works a treat. We couldn't get the D channels up when we hooked up to a PBX ISDN-PRI when the zap was pri_net, but hooking up to a carrier ISDN-PRI as pri_cpe works a treat.
Now we just have to figure out how to get the echocancelling tail a little longer without stuffing the line full of static (?!!) [=yes works =256 very noisy...] From testing with our Cisco we needed more than 16ms tail, 32ms tail on the cisco cleaned up incoming that originated from analog PSTN fine... Cheers, Peter -----Original Message----- From: Eric Bishop [mailto:[EMAIL PROTECTED] Sent: Saturday, 12 March 2005 11:58 PM To: Asterisk Users Mailing List - Non-Commercial Discussion; Peter Childs Subject: Re: [Fwd: RE: [Asterisk-Users] Re: TE410P card in an HP-Compaq DL380 G4 server] How did you go? On Tue, 8 Mar 2005 11:28:59 +1030, Peter Childs <[EMAIL PROTECTED]> wrote: > > Digium shipped me a replacement card, but they sent the wrong one, so > they fedex'd another and its just arrived. > > Should be testing in the next two days (the box is in another > state...) > > The last I heard from Eric Bishop (on the 1st march) was that he had > received an updated card from digium, but it didn't function in his > DL380... > > I can let you know the outcome of the test if you'd like. [...] > -----Original Message----- > From: Mark F. Vickers [mailto:[EMAIL PROTECTED] > Sent: Tuesday, 8 March 2005 11:20 AM > To: [EMAIL PROTECTED]; [email protected] > Subject: [Fwd: RE: [Asterisk-Users] Re: TE410P card in an HP-Compaq > DL380 G4 server] > > Was there any resolution on this I also have a TE410P in an box with > an Intel E7501 chipset? > > -Vickers _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
