On Fri, 2005-03-18 at 14:05 +0545, Vicky Shrestha wrote: > Hi, > > The asterisk configuration and the channel bank configuration are both set to > esf and b8zs. Howerver I am still getting the framing Error "Red and > blinking". zttool shows there are no alarms. > > According to the manual, Framing Error (Red and Blinking )means > > "Network T1 is out of frame (received signal cannot be framed to ESF or D5 as > configured by T1 Option switch 4)" > > I tried with both DIP switch on and off, but no help.
> > > > > > /etc/zaptel.conf > > > ===================================== > > > span=1,1,0,esf,b8zs Do you have the CAC set to provide timing to the line? If not, you need to set your timing to 0 here so the TE410P card will provide timing. Also, as a precaution, It is helpful to power cycle the machine when you change timing. -- Steven Critchfield <[EMAIL PROTECTED]> _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
