Inline... > I am trying to get the drivers working with this device with 4 fxo > modules on it. I do a modprobe zaptel and no errors appear. But when I > do modprobe wctdm the following errors appear: > > Notice: Configuration file is /etc/zaptel.conf > line 4: Cannot get number of tones chanel 1 > line 4: Cannot init tones chanel 1 > line 4: Cannot get number of tones chanel 2 > line 4: Cannot init tones chanel 2 > line 4: Cannot get number of tones chanel 3 > line 4: Cannot init tones chanel 3 > line 4: Cannot get number of tones chanel 4 > line 4: Cannot init tones chanel 4 > > 8 error(s) detected > > /lib/modules/2.4.22-2f/misc/wctdm.o: post-install wctdm failed > /lib/modules/2.4.22-2f/misc/wctdm.o: insmod wctdm failed > > > I have googled the mailing lists and have not been able to find > anything on these errors. > > My config of zaptel.conf > > fxsks=1-4 > loadzone=au > defaultzone=au > channels=1-4
Unless the above is a typo, "channels=1-4" should not be in this file; only the first three lines > zapata.conf > > [channels] > language=en > > ; XTDM20B Port #1,2 plugged into PSTN > ; > context=from-1800 > signalling=fxs_ks > faxdetect=incoming > usecallerid=yes > echocancel=yes > echocancelwhenbridged=no > group=1 > channel=1 Not sure about the syntax of "channel=1"; I know channel=>1 works though. > context=from-pstn > signalling=fxs_ks > faxdetect=incoming > usecallerid=yes > echocancel=yes > echocancelwhenbridged=no > echotraining=800 > group=3 > channel=2-3 > > context=from-fax > signalling=fxs_ks > faxdetect=incoming > usecallerid=yes > echocancel=yes > echocancelwhenbridged=no > echotraining=800 > group=3 > channel=4 _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
