Hi Jason,
I have the following output:
[EMAIL PROTECTED] root]# cat /proc/interrupts
CPU0
0: 217983314 XT-PIC timer
1: 4 XT-PIC keyboard
2: 0 XT-PIC cascade
5: 2192380433 XT-PIC usb-uhci, usb-uhci, ehci-hcd, eth0, wcfxo
7: 2179793537 XT-PIC wcfxo
8: 1 XT-PIC rtc
11: 0 XT-PIC usb-uhci, usb-uhci
12: 19 XT-PIC PS/2 Mouse
14: 1423773 XT-PIC ide0
15: 9 XT-PIC ide1
NMI: 0
ERR: 0
Am I right in saying that interrupt 5 is shared with other resources. Ok
will move the card but do I need to re-compile or something of the sort??
On another note actually callwaiting is commented out in zapata.conf, should
I uncomment it and say no?
:)
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Jason Williams
Sent: 18 March 2005 18:25
To: [EMAIL PROTECTED]; Asterisk Users Mailing List - Non-Commercial
Discussion
Subject: Re: [Asterisk-Users] Group Ring after Timeout
On Fri, 18 Mar 2005 16:59:36 +0100, Reuben Grech
<[EMAIL PROTECTED]> wrote:
> Dear All,
>
> I am listening to blips during conversations when I have an incoming
> call from an X100P card. This does not happen on all conversations.
>
> Any clues? :)
>
Check cat /proc/interrupts make sure the X100P has it's own interrupt I
suspect not.
Jason
_______________________________________________
Asterisk-Users mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
Asterisk-Users mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
