> -----Original Message----- > From: [EMAIL PROTECTED] [mailto:asterisk-users- > [EMAIL PROTECTED] On Behalf Of Lyle Giese > Sent: Sunday, March 20, 2005 11:25 AM > To: Asterisk Users Mailing List - Non-Commercial Discussion > Subject: Re: [Asterisk-Users] wctdm fxs ring frequency > > Robert Webb wrote: > > >Good morning all, > > > > I have been trying to research of to change the ring frequency for the > >TDM400 FXS port. I have several newer phones that will start to ring and > >then quit intermittently. I have tried boosting the voltage using > >boostringer=1 and that has not helped. I did verify in dmesg that the > >boostrinringer option in loading. > > > > I have searched the list and the wiki and have seen references to > >changing this in the wcfxs.c file but I am not using that. Likewise, I > >have not founf anything in by looking into the wctdm.c file. I am no > >programmer but can somewhat follow the code. > > > > Can someone just point me in the right direction?? Even if it just a > >place that describes how to change this. I have a feeling this is the > >problem with my phones. > > > >Robert > > > >
<snip garbage> > > > Or did you forget to plug in the extra power on the card? > > This card requires more power than the card slot can give it and you > need to plug in a molex power connector to the end of the card. > > Lyle > <snip list footer> Yes, I forgot to add that little detail. The card has the power from the system power supply plugged into it. And the power supply is a 500 watt that is running a single PIII 933mhz with a single hard drive. Robert _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
