Make sure you are feeding your 4801 enough "juice" to support the pci card, I'm currently feeding 15v @ 1A.

I got the x100p directly from Digium a few years ago, at the time it was a component of Digium's "developer" package.

lspci identifies the card as a "Tiger Jet Network Inc. Tiger3XX Modem/ISDN interface ". From what I understand, digium sold (and what I have) is a stock Tiger modem. I know a couple of years ago you could pickup the Tiger modem for $10-12 (thus the quip about the "digium modem donation").

I think digium stopped selling the x100p after the fxo module came out for the tdm400p.

But then the tdm400p is also a 3.3v card and can support a mix of 4 fxo/fxs modules.

Just for yucks I plugged a tdm400p with an fxs module into my 4801 and the tdm400p driver loaded just fine:

lsmod from 4801 w/ tdm400p (CVS HEAD):
Module                  Size  Used by
ohci_hcd               16648  0
wctdm                  34496  0                 <---tdm400p
zaptel                220292  1 wctdm
crc_ccitt               1920  1 zaptel
natsemi                23904  0

With the tdm400p, you'll need to wire up a 12v feed to the connector on the back of the card and you'll also need a wider box :-) Pretty cool though, a 4801 with a mix of 4 fxo/fxs ports.

Someone somewhere also makes a pci header card that has the silicon on board to support two pci cards on a 4801, might be interesting. Let's see now, mix 'o 4 fxs/fxo ports and a Sogoma w/ 2 T1/FR ports.

Now, if someone could fix the dang'd linux driver for soekris's vpn1411 hardware encryption card, you could do codec compression without taxing the geode processor. (hint, hint). Russ Nelson isn't busy right now.......... :-)

Ah yes, I'ts currently only a dream:........
Soekris with 2 T1s, 4 fxo/fxs ports and gsm running to 20 cisco eye-candy phones All from this itty-bitty boxen -)


----
John Breeden
Hawaii

Senad Jordanovic wrote:

[EMAIL PROTECTED] wrote:


Strange;

It works for me. The x100p (Digium 100 buck model) I have is slotted
for 3.3v and works fine.


I'm running gentoo with udev and the 2.6.11 kernel with soekris
patches (udev is cool, coldplug automagically loads the drivers).

The 4801 is flashed with whatever the latest bios is from Sorin.
Using a 40G 2.5 inch laptop drive, no CF Card, boot directly from HD.

Asterisk is CVS HEAD.



Hi,

Where did u buy that X100P from?

Ta
Senad


_______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users






_______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users

Reply via email to